Anycubic PLA Silk Tri-colour Filament 1kg – Red/Blue/Yellow

Product overview

About this product

Tri-colour silk gradient in one spool | Silky lustrous finish | Compatible with 0.4 mm nozzles and above | Print speeds up to 250 mm/s | Supports intelligent filament identification The Anycubic PLA Silk Tri-colour Filament in Red, Blue, and Yellow is designed for makers who want to elevate decorative prints, fan art, and artistic models beyond single-colour results. Three colours are blended into a single 1 kg spool, producing smooth gradient transitions and a silk-like lustrous finish that shifts visually as the model is rotated. You can fine-tune the surface gloss by adjusting nozzle temperature and print speed — a higher temperature or slower speed increases fluidity and produces a higher-gloss, smoother surface, while cooler or faster settings give a subtler sheen. Compatible with any FDM printer that accepts 1.75 mm filament and a nozzle of 0.4 mm or above, it runs at printing temperatures of 210–240 °C, a heated bed of 55–56 °C, and recommended speeds of 50–250 mm/s. On compatible Anycubic printers the intelligent identification chip is read automatically, streamlining setup without any manual input. A reliable, visually striking choice for decorative and display-quality 3D prints. Features • Tri-colour gradient (Red, Blue, Yellow) blended in a single 1 kg spool for layered, multi-tone prints • Silk-like lustrous finish that shifts appearance with viewing angle • Adjustable gloss — tune nozzle temperature (210–240 °C) and print speed (50–250 mm/s) to control surface sheen • Compatible with all 1.75 mm FDM printers using a 0.4 mm or larger nozzle • Intelligent identification chip for automatic filament recognition on compatible Anycubic printers • Suited to decorative parts, fan art, figurines, and display models Specifications • Colour: Red Blue Yellow (#003594,#F3D03E,#D22630) • Dry Out Before Use: Recommended • Drying Condition: 55-65℃, 6-8h • ACE Compatibility: Compatible • Nozzle Size: Recommended 0.4 mm or above • Printing Temperature: 210-240 ℃ • Heated Bed Temperature: 55-56 ℃ • Recommended Printing Speed: 50-250 mm/s • Maximum Volume Speed (Flow Rate): 8 mm³/s • Density: 1.22 g/cm³ • Melt Index: 9±1 g/10 min (190℃/2.16kg) • Melting Point Temperature: 164 ℃ • Vicat Softening Temperature: 54 ℃ • Heat Deflection Temperature (0.45MPa): 53 ℃ • Young’s Modulus: 2000±200 MPa • Tensile Strength: 37±4 MPa • Elongation at Break: 28±5% • Bending Modulus: 2400±160 MPa • Bending Strength: 66±4 MPa • lzod lmpact Strength (X-Y): 20±2 kJ/m² • Tensile Strength (Z): 12±4 MPa • Filament Type: Aesthetic filaments • Recommend to Print: Decorative parts, fandom, artworks • Intelligent Identification: Supported • Reusable Filament Spool: Supported • Size: 1KG What's in the Box • Anycubic PLA Silk Tri-colour Filament 1kg – Red/Blue/Yellow x1