Anycubic PC Filament 1kg – White

Product overview

About this product

Engineering-grade PC filament | High impact and heat resistance | Smooth, lustrous surface finish | 1kg spool The Anycubic PC Filament is an engineering-grade polycarbonate filament designed for makers and engineers who need parts that go beyond what standard PLA or ABS can offer. Compatible with FDM printers fitted with a nozzle of 0.2 mm or above, it prints at 270–290°C with a heated bed of 100–120°C, and supports print speeds of 40–250 mm/s. With a heat deflection temperature of 110°C and strong mechanical properties — including a tensile strength of 65±6 MPa and an Izod impact strength of 30±12 kJ/m² — it is well suited to structural parts, functional components, automotive applications, electronic housings, and outdoor use. The filament also delivers smooth model surfaces with a translucent, lustrous quality. Note that active drying is required before printing: 80°C for 8–12 hours. Supplied on a 1kg reusable spool with intelligent identification chip support for compatible Anycubic printers. Features • Engineering-grade PC filament for structural, functional, and outdoor applications • Heat deflection temperature of 110°C — resists warping and deformation under prolonged heat • Izod impact strength of 30±12 kJ/m² (X-Y) for tough, crack-resistant parts • Tensile strength of 65±6 MPa and bending strength of 105±10 MPa • Smooth, translucent, and lustrous surface finish • Intelligent identification chip supported for compatible Anycubic printers • Reusable spool with threaded connection system to reduce filament entanglement • Active drying required before use: 80°C for 8–12 hours Specifications • Colour: White (#FFFFFF) • Dry Out Before Use: Required • Drying Condition: 80 ℃, 8-12 h • ACE Compatibility: Compatible • Nozzle Size: Recommended 0.2 mm or above • Printing Temperature: 270-290 ℃ • Heated Bed Temperature: 100-120 ℃ • Recommended Printing Speed: 40-250 mm/s • Maximum Volume Speed (Flow Rate): 12 mm³/s • Density: 1.2 g/cm³ • Melt Index: 15-20 g/10 min (270℃/1.2kg) • Melting Point Temperature: 230 ℃ • Vicat Softening Temperature: 122 ℃ • Heat Deflection Temperature (0.45MPa): 110 ℃ • Young’s Modulus: 2550±100 MPa • Tensile Strength: 65±6 MPa • Elongation at Break: 9±4% • Bending Modulus: 2900±150 MPa • Bending Strength: 105±10 MPa • lzod lmpact Strength (X-Y): 30±12 kJ/m² • Tensile Strength (Z): 25±7 MPa • Filament Type: Engineering filaments • Recommend to Print: Structural parts, functional parts, automotive parts, outdoor use, electronic housing, artworks • Intelligent Identification: Supported • Reusable Filament Spool: Supported What’s in the Box • Anycubic PC Filament 1kg – White x1